Skip to main content

Exterior painting on Fitzjohn's Avenue

Exterior painting on Fitzjohn's Avenue: yellow and red brick left bare, joinery on bays, porches and gables coated, and metal prepared apart from masonry.

What is actually painted on a front here

Houses on Fitzjohn's Avenue are mainly yellow and red brick, some with contrasting brick detailing, and that sentence settles most of the specification before a colour is chosen. Camden's guidance says natural materials such as brick and stone should not be painted, rendered or clad unless that was the original treatment. So the painted surfaces on a typical front are the joinery, the metalwork, and any section that was genuinely rendered from the start.

That leaves plenty of work, because the elevations are not plain. Gothic, Italianate and Queen Anne revival influences are all drawn on along this avenue, and bays, porches, gables and modulated facades are the features they have in common. Each of those is a different exposure. A bay has three faces and two returns, a porch has a soffit and a pair of jambs, a gable puts timber at the highest point of a tall front. An exterior quotation that itemises those separately is a quotation that can be checked. One line for the outside hides the parts that take the time.

Tall brick fronts on a traffic route need the same washing-down discipline as the heath side, which Highgate painters and decorators describe. Access and parking on a busy road are covered by Highgate painters and decorators.

Height, access and the long front path

The street is predominantly four-to-five storey properties, though with some variation, and many stand on raised ground floors, so the top of an elevation is a long way above the pavement. Fitzjohn's Avenue was also set out with a 50-foot wide carriageway and a 10-foot wide pavement lined with large mature street trees. A wide public footway and large trees change what can be stood where, and the houses were set well back behind long front paths, so plant and materials are carried a distance before any preparation begins.

Where Camden records harm from the creation of front garden car parking and the removal of traditional front boundary walls, the practical effect is a hard surfaced forecourt and no enclosing edge. The pavement itself is a mixture of York stone and black asphalt where grass verges previously existed. None of that is a decorator's business to put right, but all of it decides how a front is reached, protected and left clean at the end of a day. Access gets described on site, with the owner, before a figure is written down.

Washing down on a traffic route

Air quality on the avenue is poor, mainly from traffic pollution, which also deposits dirt on historic building materials. That single recorded fact shapes the whole preparation sequence on this street. Film-forming soiling on joinery and iron is a weak layer, and anything applied over it borrows the adhesion of the dirt rather than the timber. Washing down comes first, works from the top of the elevation downwards, and is checked rather than assumed. On a front that has not been touched for years the washing stage can take as long as the coating stage.

After washing, ordinary practice applies without any need for numbers or brand names: loose and flaking material is cut back to a sound edge, bare timber is primed, filled where the surface has broken down, and rubbed to a flat profile before finishing. Sound old paint that is still adhering is left in place rather than stripped for the sake of it. Dust from rubbing is collected rather than allowed to settle on the brickwork or on the iron below, which is another reason to work downwards rather than in patches.

Boundaries, metal and window reveals

Where a traditional front boundary survives, any metal on it is decorated apart from the wall it stands on. Metal is prepared on its own, primed where it has gone back to bare iron, and finished with a coating made for metal rather than the one used on the timber above it. The masonry behind is masked and left as masonry. A run of railing interrupted by a gate, a step or a parking entrance is measured in sections, because the broken run is where corrosion usually starts and the sections are rarely in the same condition as each other.

The appraisal makes a point about windows that reads directly onto exterior painting: how far a window sits back in its opening is an important part of the building's character, so the degree of recession should be respected if windows are replaced. A deeply recessed frame sits in a reveal that stays damp longer than the open face of the wall, so it is checked for moisture before coating and given time rather than being closed in. The reveal belongs to the window in the specification, not to the wall.

What moves the cost of an exterior on this avenue

Four factors do most of the moving, and none of them is a figure. The first is height, because four to five storeys with raised ground floors needs a different access arrangement from a two-storey front. The second is modulation: bays, porches and gables multiply the edges, returns and soffits to be cut in, and a modulated facade has more surface than its measured width suggests. The third is condition, which is only knowable once the front has been washed and the loose material cut back.

The fourth is the amount of genuinely paintable surface. A front that is mainly yellow and red brick with contrasting brick detailing has less coated area than its size implies, because the brick stays bare and the contrast is already built into the wall. That usually makes an honest exterior quotation here smaller in painted area and larger in preparation and access than an owner expects. It is also why the survey, rather than a photograph, is what produces the figure.

Exterior painting questions from Fitzjohn's Avenue

Should the contrasting brick detailing be picked out in paint?

No. The contrast is already brickwork: fronts are mainly yellow and red brick, some with contrasting brick detailing, and Camden's guidance says natural materials such as brick and stone should not be painted, rendered or clad unless that was the original treatment on the building. Painting a band or an arch that is already a different brick replaces a built detail with a drawn one, and it is the kind of change the appraisal treats as harmful. Colour decisions belong on the joinery and the metalwork.

Why is washing down treated as a priced stage rather than a courtesy?

Because the appraisal records that air quality along the avenue is poor, mainly from traffic pollution, which also deposits dirt on historic building materials. Traffic soiling sits as a film on joinery, iron and masonry. A coating applied over it is bonded to the dirt rather than to the surface beneath, and it fails early. On a through route like this one, washing down from the top of the elevation downwards is a real part of the work and is written into the quotation as such.

How does the width of the pavement affect the working arrangement?

The avenue has a 50-foot wide carriageway and a 10-foot wide pavement lined with large mature street trees, and the houses were set well back behind long front paths. Mature trees overhang, the public footway has to stay usable, and plant has to be carried in. Where front boundary walls have been removed for car parking, there is also no enclosing edge to work behind. Those are site facts to be agreed before work starts rather than discovered on the first morning.

Sources

Related reading

An exterior figure for Fitzjohn's Avenue is written after the brick, the joinery, the iron and the access have each been looked at on their own. Book an exterior survey on Fitzjohn's Avenue.

Talk to us

Tell us about your project

Share the work you have in mind and your property postcode. You can also contact us directly.

We use these details to respond to your enquiry. Read our privacy policy.