Skip to main content

Exterior painting on Belsize Park Gardens

Exterior painting on Belsize Park Gardens: stucco villas with rusticated quoins and eaves brackets, and red brick at Manor Mansions left bare.

A whole front that genuinely is a painted surface

Most streets in this part of north London give a decorator a brick wall and a few painted details. Belsize Park Gardens does the opposite. These streets are predominantly residential and characterised by the repeated forms of the stucco villas, whose design gives a strong identity and unity of appearance, and the character of Belsize is largely derived from mid-19th century Italianate villas. Stucco was always a finished surface, so here the wall itself is in the contract, and the quantity of coated area is large rather than token.

That changes how the job is costed and how long it takes. A stucco elevation has to be washed, sounded for hollow areas, cracked sections opened and filled, and then coated in a finish that lets moisture out of the wall. Camden says routine maintenance such as unblocking gutters and rainwater pipes, repairing damaged pointing and stucco, and painting and repairing wood and metal work will prolong the life of a building, which places stucco repair inside the same programme as the painting rather than outside it.

A whole stucco elevation is a bigger job than a brick one, and the same type is described by Primrose Hill painters and decorators. Hollow or cracked stucco should be diagnosed first by Hampstead Chartered Surveyors, our sister surveying and building consultancy firm.

Quoins, brackets and chimney stacks

The elevations have large rusticated quoins. Rustication means the corner is modelled with deep recessed joints, and each of those joints is a place where water sits, dirt collects and a previous coat has usually built up thick and then cracked. Cleaning them out and cutting in along them is slow, and it is the part of a stucco front most often skimped. A quoin that has been rollered over loses its shadow, and with the shadow goes the modelling that made the corner read.

Above, the villas have hipped slate roofs with overhanging eaves supported on brackets, and they are symmetrical about their slab chimney stacks. A run of eaves brackets is a sequence of small overhead elements with returns on three faces, done from a working platform with the head tilted back. The slab stack is the most exposed masonry on the house and the place where failure shows first. None of those three features can be measured as flat area, which is why they appear as their own lines in a proper quotation.

Where the brick starts, the painting stops

Original brickwork, says Camden's Belsize guidance, should not be painted, rendered or clad unless that was the original treatment, and inappropriate external painting, particularly of brickwork, is listed among the changes that harm the conservation area. On this street the rule matters most at the corner with Belsize Grove, where Manor Mansions is built in red brick with stucco banding and detailing and provides a marked contrast to the surrounding stucco villas. On that building the bands and dressings are the painted elements and the brick between them is not.

Boundaries follow the same logic and differ from side to side. On the east side, as at No. 74, front walls have stone balusters and squat piers; on the west side at Nos. 83-85 there is a timber fence and railing on a low red brick wall. Those balusters are masonry: washed down, and coated only where paint already sits on them. Timber takes a timber finish, the railing takes a metal one, and the low brick wall is masked and left. Three materials, three specifications, one boundary.

The rhythm of the street, and the view round the back

A continuous building line is held by the closely spaced villas, whose repeated forms and narrow intervening gaps give these streets their uniform rhythm and their glimpsed views. For an exterior scheme this is a colour constraint and an access constraint at once. A shade that jumps out of the run spoils the rhythm the street was built on, and the narrow gap between paired villas is often the only route to a rear elevation, with a drainpipe, a gate and someone else's planting in it.

There are also views along the rear elevations of properties from adjoining streets in a number of locations. That single fact ends the common assumption that the back of the house does not need the same standard. On this street a rear elevation can be the most visible thing in somebody else's view, so the rear stucco, the rear joinery and the rainwater goods are specified to the same level as the front rather than being offered as an optional extra.

Sequence and the factors that move the figure

Work goes from the top down: stack and eaves first, then the main stucco, then the ground-floor bay and portico, then the boundary and any iron. Each elevation is washed, allowed to dry and checked before coating; a stucco wall that is coated damp blisters along the bottom and at the quoins. Loose material is cut back to a sound edge rather than feathered over, and repairs are allowed to cure before the finish goes on. Debris is collected at each level so nothing lands on a finished surface below.

Four things move the figure here and none of them is a published number. The amount of stucco repair found after washing, which cannot be known before. The quoins, brackets and stack, which are hand work rather than area. Whether the rear elevation is in public view and therefore in the specification. And access through the narrow gaps between paired villas, which is agreed with the owner and sometimes with the neighbour before a start date is set.

Exterior painting questions from Belsize Park Gardens

Why is a stucco front a bigger job than a brick one?

Because the wall itself is the painted surface. The streets here are characterised by the repeated forms of the stucco villas, and the character of Belsize is largely derived from mid-19th century Italianate villas. Stucco has to be washed, sounded for hollow patches, cracked areas opened and filled, and then coated in a finish that lets moisture out. Camden's own guidance puts repairing damaged stucco in the same maintenance programme as painting wood and metal work, which is a fair description of what the work involves.

Can the red brick at Manor Mansions be painted to match the villas?

No. Manor Mansions is built in red brick with stucco banding and detailing and provides a marked contrast to the surrounding stucco villas, and that contrast is the point of the building. Camden's Belsize guidance says original brickwork should not be painted, rendered or clad unless that was the original treatment, and the council lists inappropriate external painting, particularly of brickwork, among the harms to the conservation area. The banding and dressings are painted; the brick between them is left as brick.

Does the rear of the house need the same specification as the front?

On this street, usually yes. The appraisal records views along the rear elevations of properties from adjoining streets in a number of locations, so a rear elevation here is often visible to the public and to neighbours. The narrow gaps between the closely spaced paired villas are also the route to the back, which affects access. Both facts mean the rear stucco, joinery and rainwater goods are specified to the same standard rather than treated as somewhere the finish can be relaxed.

Sources

Related reading

An exterior price for a Belsize Park Gardens villa depends on what the washing uncovers in the stucco, so the survey comes before the figure. Book an exterior survey on Belsize Park Gardens.

Talk to us

Tell us about your project

Share the work you have in mind and your property postcode. You can also contact us directly.

We use these details to respond to your enquiry. Read our privacy policy.