Exterior painting on Eton Avenue
Exterior painting on Eton Avenue: roughcast render and half-timbering coated, red brick, tile hanging and terracotta deliberately left bare.
Sorting the elevation into coated and uncoated
The first job on any front here is deciding what the painting contract covers. The predominant materials on Eton Avenue are red brick, red clay tiles and tile hanging, and those are contrasted with London stock brick on upper floors, roughcast render and half-timbering to give visual interest, with decorative terracotta also used. Of that list, roughcast render and the timber of half-timbering are the painted surfaces. The brick, the clay tiles, the tile hanging and the terracotta are not.
There is general consistency of materials in the area, with red brick and red clay tiled roofs a recurrent theme, so painting the brick on one house would stand out along the whole street. Camden's rule about painting original brickwork in the Belsize Conservation Area is set out on the Eton Avenue place page, and it is why a written proposal lists the excluded surfaces by name rather than leaving them to be assumed.
Roughcast render beside bare brick needs the line between them held, which St John's Wood painters and decorators also describe. Render that is cracking rather than dirty should be looked at by Hampstead Chartered Surveyors, our sister surveying and building consultancy firm.
Roughcast render and half-timbering
Roughcast is a textured render, and texture is what makes it a particular job. It holds dirt in its surface, so washing takes longer and has to be thorough; it uses more material per measured square metre than a smooth wall; and a brush or roller has to be worked into the texture rather than drawn over it, or the hollows stay the old colour. Cracks in roughcast are opened out and filled before any finish is applied, and the finish is chosen so the wall can still dry outwards.
Half-timbering is two materials in one panel: the timber frame and the render or infill between. They are cut in against each other along their whole length, which is slow and unforgiving work, and the timber is prepared as joinery rather than as wall. Gutter clearance, pointing repair and the painting of timber all fall within a few square metres on a half-timbered gable, which is why it is the slowest part of the elevation and the first part to fail when it is rushed.
Bays, chimneys, gables and the asymmetry
Asymmetrical elevations, canted and curved bays, large slab chimneys, gables, and white-painted timber casement and sash windows subdivided by glazing bars into smaller panes are the themes that keep recurring along the street. Asymmetry is a pricing problem as much as an architectural style: there is no mirror half of the elevation to copy, so every feature is counted once on its own. Canted and curved bays add angled and swept surfaces where the glazing, putty and paint all meet.
Glazing bars decide the labour. A window divided into small panes has several times the cut-in length of a plain one, and it has a putty line at every pane that may need making good. Casements and sashes both appear here, and they take different handling at the edges and the ironmongery. The schedule is therefore built from lights rather than openings, and the bays and gables are itemised rather than absorbed into a single figure for the front.
Trees, narrow gaps and the frontage
Mature trees line the streets as a defining characteristic of the area, filtering views of the frontages and enclosing the street, while the building line stays constant and the gaps between buildings stay small. In working terms: the lower elevations are shaded and dry slowly, debris lands on heads and sills and has to be washed off, and the route to a rear elevation is a narrow gap between two houses with drainage, a gate and planting in it. All of that is agreed at the survey, not improvised later.
The frontage walling and decorative gate piers with terracotta caps are consistent, and that consistency is echoed across the street, while Camden records that removing the frontage boundary to create off-street parking outside Nos. 38-40 interrupts an otherwise well-defined and largely consistent frontage. Where a wall and piers survive, they are covered and left as masonry; terracotta caps are not painted. Where the boundary has gone there is more standing room and nothing to protect, which is a convenience rather than an improvement.
Sequence, materials policy and what moves the figure
Work runs downwards: chimney and gable first, then the render panels and half-timbering, then the windows, then the ground floor bay and the boundary. Each surface is washed and confirmed dry before coating, which on a shaded front under mature trees can mean waiting rather than pressing on. Camden requires the original or closest possible natural materials and states that concrete roof tiles, artificial slate and PVCu windows would not be acceptable, so replacement is not a shortcut around a repair here.
Three factors move an exterior figure on this street. The proportion of the elevation that is genuinely render or half-timbering, because the brick, tile and terracotta are excluded. The number of panes, since small-paned casements and sashes are the labour. And the access through the narrow gaps and under the trees, which varies house by house along a road where the designs differ even though the materials repeat. The survey settles all three before a price is written.
Exterior painting questions from Eton Avenue
Can roughcast render be sprayed to save time?
This page does not recommend a method over a figure, but the texture is the reason care matters more than speed. Roughcast holds dirt in its surface, so washing has to be thorough before anything is applied, and the finish has to be worked into the hollows or they stay the old colour. Cracks are opened out and filled first rather than coated across. The finish is also chosen so moisture can leave the wall, because a tight film on a textured render lifts in plates when the wall tries to dry.
Why are the tile hanging and terracotta excluded from the scheme?
Because they are already weathering surfaces. The predominant materials on Eton Avenue are red brick, red clay tiles and tile hanging, with decorative terracotta also used. Hanging tiles shed water at their laps and dry between showers; a coating bridges the laps and holds water against the battens. Terracotta has a hard fired face. The brick, the clay tiles and the terracotta are all left as found, and the proposal says so surface by surface.
How do the street trees and the narrow gaps affect the programme?
They affect drying and access. The mature trees lining the streets filter views of the frontages and enclose the street, and the streets have a constant building line with only small gaps between the buildings. Shaded lower elevations stay damp longer, debris from the trees has to be washed off heads and sills, and the only route to the back of many houses is a narrow gap containing drainage and planting. The programme therefore follows which elevations are ready rather than a fixed running order.
Sources
Related reading
- Exterior painting for render, roughcast and exposed joinery
- Back to the Eton Avenue place page and its sourced facts
- Exterior painting on Belsize Park Gardens, where the whole front is stucco
- Sash restoration on the Tidey villas a few streets north
- Exterior painting on Thurlow Road, render below and London brick above
- A local guide to decorating period homes in Hampstead
An exterior figure for Eton Avenue depends on how much of the front is render or half-timbering and how many panes the windows are divided into. Book an exterior survey on Eton Avenue.